CARVING and WHITTLING
36
Carving knives and whittle knives
26
Carving hobby sets
4
Blanks and accessories
6
KNIFE ACCESSORIES
342
Starter Kits
8
Blades
148
Bolsters (handle)
28
Handle bolsters (deco)
6
Upper fittings
75
Handle materials
67
Accessories
10
LEATHER AND SHEALTH ACCESSORIES
118
Sheat accessories
118
Leather for sheath
14
Virgilio Conceria - Italy
3
Pelo Leather for sheath
7
Swedish Leather - Tärnsjö
1
Leather for sheath
3
Finishing and processing
36
Dyeing colors
19
Leather finishing
9
Chemicals
8
Metals
23
Brass cap bolster Nut - bevel
Main Page > KNIFE ACCESSORIES > Upper fittings
24mm hex nut upper bolster - rounded bewel
Turned embedment Ø 8mm, with a 4mm thread machined into it.
With this you get a nice upper edge and at the same time a locked handle.
All you have to do is machine a 4mm thread into the upper end of the rod to a suitable size and drill an 8mm countersunk hole at the end of the handle.
Brass is quite a soft metal, so this works as the glue's friend.
After assembly, the nut shape can be easily shaped by sanding e.g. into the shape of the Tommi-hela. Nice and a little different when finished just like that.
Nut 24mm - nut height approx. 13.5mm
embedment Ø8mm - length 10mm - inside Ø4mm thread with a depth of 18mm
Total length approx. 23mm