CARVING and WHITTLING
30
Carving knives and whittle knives
22
Carving hobby sets
4
Blanks and accessories
4
KNIFE ACCESSORIES
322
Starter Kits
7
Blades
131
Bolsters (handle)
27
Handle bolsters (deco)
6
Upper fittings
77
Handle materials
65
Accessories
9
LEATHER AND SHEALTH ACCESSORIES
121
Sheat accessories
121
Leather for sheath
17
Virgilio Conceria - Italy
5
Pelo Leather for sheath
7
Swedish Leather - Tärnsjö
2
Leather for sheath
3
Finishing and processing
41
Dyeing colors
23
Leather finishing
9
Chemicals
9
Metals
17
Brass cap bolster Nut - bevel
Main Page > KNIFE ACCESSORIES > Upper fittings > CapPlates
24mm hex nut upper bolster - rounded bewel
Turned embedment Ø 8mm, with a 4mm thread machined into it.
With this you get a nice upper edge and at the same time a locked handle.
All you have to do is machine a 4mm thread into the upper end of the rod to a suitable size and drill an 8mm countersunk hole at the end of the handle.
Brass is quite a soft metal, so this works as the glue's friend.
After assembly, the nut shape can be easily shaped by sanding e.g. into the shape of the Tommi-hela. Nice and a little different when finished just like that.
Nut 24mm - nut height approx. 13.5mm
embedment Ø8mm - length 10mm - inside Ø4mm thread with a depth of 18mm
Total length approx. 23mm